Skip to main content

Week 5: Foundation work continues

Luckily Poland is not faring well in the World Cup... Thom's guys were able to work on the walls last week - bringing the 1st floor ceiling height level to 9 feet, and installing angle irons where we will need window openings cut out.  We will wait to cut those out until the framing is done - thereby allowing for more stable and secure masonry walls.  We also had the make the executive decision to remove (well, remove, replace, remove, replace, remove, replace), the many layers of subfloor on the existing part of the house.  Talk about a plethora of screws, nails, glue, plywood etc etc etc!







Comments

Popular posts from this blog

Week 35: Interior hardware

Still no Enbridge, so this little green electric heater is heating the whole house! Mick has finished spraying in the house, so Jampa swung by to install all of the interior hardware.

Final post

Week 2: Footings and bench pinning

Phil, Miguel's footing guy, was in at the start of the week to layout the footings.  After pouring, I was able to get Thom in there to form and pour the bench pinning (kind of like underpinning, but poured in one shot to allow for a deeper basement level for the rec room).